After my appointment of vice, which I use as a front ferrule on a workbench, was delivered in a pretty windy cardboard which was a bit damaged. The box is simply too weak on the chest for this been 17 kg Part. There is no guide or mounting hardware included, so that you do have to think about themselves: "How can I make this monster on my small, dainty workbench?" I opted for 10er and 10er-nuts threaded rods to the vise the necessary support to give also for rough work. The dimensions, the range and facilities equal to the Offer described. Unfortunately, the device comes without any lubrication at the customer, so that here refills itself. The spring force of the quick release is enormous, so the ziehrlich built artisan hands may have problems applying the necessary power to operate it. The jaws are absolutely parallel to each other and close and evenly over the entire surface. The vise must of course be provided with their own allowances for the jaw. I've since decided to 20mm multiplex and will see if proven that. All in all a very good part, which I was able to purchase low due to a supply action. Buy recommendation!