The train-Kapp-miter saw Einhell RT-SM 305 L was delivered within 2 days. The assembly of the undercarriage worked without any major problems, it is quite stable. The lateral handles, which are simply plugged hold, not very good. I've screwed nachträgtlich with small self-tapping screws to the undercarriage. I also realized that a table insert (3-piece seal between the base and turntable) was not installed properly - he stood forth. Since my return the saw was too much trouble, I disassembled the table insert and built the table insert correctly (it had to be only solved a few screws). The ongoing operation showed that the supplied Sägefangbox has had little effect. I have therefore attached a Kärcher industrial vacuum cleaner to the suction. Again, one must respect the dirt and dust do not expect miracles. The suction holding the load on the plugged, flexible suction tube was not long and is broken off above the screw (in my opinion a bit too weak constructed). I have it claimed as warranty. The Erstatzteil was delivered without hesitation free. To avoid a renewed breach of the adapter, I have the suction briefly mounted above the adapter with a cord to the handle of the cross-cut saw. The note of another buyer, according to which the laser outdoors is only faintly visible, I can confirm. The adjustment possibilities are overall quite good and the traction device slips easily. The clamping devices are often very helpful. The sawing could be well done.
Conclusion: Apart from small teething problems I'm quite happy with the train-Kapp-miter saw RT-SM 305 L Einhell considering the purchase price. It is sufficient for home improvement or their own use in my opinion.
