Without effort and pressure goes through the wood that it is ne true joy. The cut edges are clean, fit and not frayed.
Whether hardwood or softwood with this Schätzken I have my true joy. Due to the shape of the handle is longer sawing possible to tire without equal. The handle has just the right thickness for me, scho fits. For thinner handles I need solid pack to keep you safe at the saw, by the hand tired very quickly.
So far had no problems with Hab thin wood panels. Can only happen that when preparing the Saw the wood splintered. But the can also prevent the Sägewütige. Cut a notch in with a sharp knife. Or hacksaw goes. In the notch then attach the blade and it works without problems. For narrow boards that are coated, it's no problem. Place the saw completely flat and carefully cut without pressure. For larger disks nothing is different than to be recognized as the saw at an angle to the edge. Here it may happen that the wood splinters on the surface. As I said take a sharp knife or a hacksaw and propose a notch. Must not be very deep. 5mm rich already made.
Compared to other saws breaks almost nothing from when coated wood. If, then it happens when scheduling the saw.
Even straight cuts no problem with the blade just right. Not too rigid and not to bending. Although the blade is significantly thinner than other saws. Not such a feeling as I try edgewise through the wood to press an A4 sheet of paper.
A really fine tool!