Who expected soon coming sometime dealing necessarily with the theme Changing Table Heat. There are many different models on the market, the manufacturer Reer is just one of many. We have reinforced us from the beginning on a stainless steel appliance, and have after long back and forth this order here. The decisive factors were then relatively good reviews, the look and of course the price.
PACKING & FIRST IMPRESSION
The unit was delivered stable packaged and cardboard from the outside looked promising. Inside was a stainless-Changing Table Heat looks exactly like the photo on the product. At first glance, he made a very good impression.
ASSEMBLY
For the assembly it is inevitable to drill 2 holes in the wall. But one has to comply to instructions 1m distance to the ceiling. We've left ultimately only 90cm space to the ceiling. It may no shelf or cabinet stand or hang on next. If the device hangs times does not make it feel like it could free itself from the hook. Now, with this clockwork and the power cord that hangs down there sees the device if you go back a few steps but pretty cheap from.
USE
The string on which the unit is turned on does not look high. At the first turning, we had the feeling that we, the device falls down when we take off. This meant that we almost always first einschalteten the device and have then placed the baby on the changing table. But I have to say that the device bombenfest sat in effect on the wall and has never fallen down. When the unit is turned on, it will warm very quickly. Souzusagen was the spotlight from operating when the baby is ready undressed. For the diaper change, we have the device only uses the first few weeks, at normal room temperature is no problem.
The worst was this: Every time we turned on the radiator, the movable part of the grid and the heating coil worked behind down. So the spotlight beamed down the wall and the only thing that was hot was the child's head ... Although you may find the device ansich in the correct position, it happened again and again until we had the rabbit busy and it forced with further auxiliaries to have no longer to tilt down.
The complaints of many who can not make friends with the shutdown I can not understand that. We never had problems with it. It's a kind of fuse when 2x pull clockwork then need to bring it back on track. I have the whole time only once off the radiator and forgotten was glad that the part has not flared us the Bude. After 10 minutes, it is turned off. I do not understand the parents, let the unit go through just the 10 minute because it was then off anyway! Since I'd never trust such a thing, so also you squandered a lot of unnecessary power! We have always turned it off when we were done. So the way is created not the problem with the 2x pull clockwork ...
By the way, we moved 10 months after the child's birth and have not hung up the unit in the new place. This was due to the low ceiling height and the lack of space. We have super quickly realized that it'll be done without additional heat. For the first few months of a Changing Table Heat is very useful and you should not save it.
CONCLUSION
Mediocre. I do not know if I'd exactly these buy here again. This string to toggle always made me a little worried. As I said, we could not determine the correct direction of the beam. Stainless steel like it but nevertheless still better than a plastic radiator. We have our Reer spotlight after standing around 2 years in the cellar for a few "pennies" sold. I've heard it warms still reliably the changing area. The cord is never lost. Therefore, I would give the device as the current average of asterisks shows exactly 4 stars. Not perfect, but does what it should.
