The set was kindly provided free of charge through a test auction of testberichte.reviews by the manufacturer.
It consists of a white charger and a white cable (USB to 30-pin connector - to the Iphone 4s compatible). The design is almost identical to the original Apple product.
It should be able to provide up to 1 Amp. When charging my iphone 4 is provided initially about 0.7A and sank with a full battery continuously (a low-priced device from Asia, I heranzog for comparison yielded 0,54A). The plummeting value towards the end is also desirable because it is battery friendly
With favorable chargers Iphone freezes when loading a sometimes, that you can while charging the Iphone only difficult to operate because everything jerky strong. When OKCS does not happen.
The cable is a little stiffer than the original and has a similar lightly smoked surface.
The 30-pin Apple connector sits firmer than the original plug in the iphone. Thus, it can not easily slip out so.
On the other side but you have to apply some pressure to get the plug into the Iphone and also to pull it out again.
But this will probably place within 2-3 weeks, since then the springs are slightly longer recorded. Currently, I find it hard. The connector is also 0.1 mm thicker than the original Apple connector.
In another review I've read that it did not work with a car power supply. My cable works seamlessly in your car.
Even when Synchronize with iTunes, I have not noticed any problems and it has been working as the original cable without hesitation.
The Apple Mini Docking Station A1353 there are no problems.
Small Optical blemish:
At the 30-pin connector is next to the logo a little "dirt" that is not even easy to remove - but it's just a cable and there does not disturb what little.
Conclusion: For less than 10 you get a decent set here, it was delivered quickly and works without difficulty. Only the somewhat resistant cables bothers me a little, but that will have hopefully set use after a few weeks.