The machine comes in a cardboard box in a few individual parts. Inneralb of 20min the chopper is assembled. The manual is very unhelpful and reminds me of instructions from the well-known Swedish furniture store. The insertion of the collecting basket and its Veriegelung is how other Rezensoren already noticed a Frickelei, but with patience, this is also to create. UD2000 the first chopper I have purchased from Amazon by the company normon. After assembly, I wanted to try the same chopper. Connected to the grid, green button: nothing. The red LED flashes and even in the company Makita in Dusseldorf could not me, despite the friendly service help. When we complained, the company normon presented not just to be very friendly and customer-oriented, but this might be because this company in my opinion in Poland is and the German language is not very powerful. At the end there was still a return. At the same time I ordered through Amazon, this time in Germany, again the same device. When assembled, connected to the mains and press green button: the machine did what they should. After about 2hours, however, the first branch, not the thickest, but he got stuck eating. Forward, Backward, the garden assurance flew. It should be forgiven the machine. The blade cover aluminum taken down (here survives of course, nothing in the manual) herausgestämmt tedious and the road. Reassembled and pressed the green button: Nothing. The red LED flashes. I again phoned Makita and requires a telephone solution with more emphasis, this time I was not only associated with the "art" but with the "assembly". Here was known communication: Behind the aluminum plate are two S icherungstaster: One on the top right and bottom left behind the threaded hole of the lower left screw. During assembly you have to make sure that the lower left screw is screwed nterlegscheibe only with a U. After assembly in accordance with this advice he purred again.
Not a bad device, but the manual resulted in nuisance and devaluation
