When I write "not perfect" it is because that is simply not reach an absolutely dust-free environment in the "normal life". As soon as the phone display clean, is two seconds later already the first Nanofussel back on it. So, it's like to work quickly and accurately, because extremely precisely the film is actually, and I needed well to the 10-15 attempts between twice the film again with plenty of water (that's actually!) And water and "fat paw prints" of the adhesion site again with adhesive strip to remove (do not try with a cloth, wipe the adhesion site! Trying cost me the two water rinses and 30 min. more work!).
Nevertheless: After rinsing and "Disconnect" with adhesive tape the adhesion site in the first attempt by wiping with a cloth thoroughly "kinky", the film was again OK! Wow! And I thought I had it finally sifted and 3.49 Euro would for a ton!
Okay, sheet clean again: It was difficult now, should get the right location. But be forewarned, I now had about 30% with the thin protective film on the display foil glued previously covered by the display. So I came again "from wrong", I could lift the film by the underlaid protector again and grasp the edge without touching again on the adhesion site.
5-6 more attempts later, I had it: results! Foil on all 4 display edges to approx 0.3mm exactly it and she was nowhere about. Some minimal air bubbles I squeezed out the enclosed Papprakel. Just a few bubbles, about 3-4 pieces of 1-2mm diameter remained at the black border (here sits some of the inevitable dust underneath) from the display, and I left it so, as the display itself, where it indicates something , "bubble free" is.
After the application of the operator from the touch screen was unchanged. So the film has no effect on the sensor sensitivity. The display presentation was as ever. In color, sharpness etc., the film also has no negative effects.
Conclusion: Not for Grobmotoriker, about half an hour of work has the film Beginners probably invest that to make a good result. Those like me who still makes stupid mistakes and tried to wipe the adhesion site with a cloth more work, with "water features" and / or Tesa adhesive strip land and a good 20 min. There!
The great result but then reconciled fully with the effort and the "fumbling"! Of all the films that have to be applied not by robots in a cleanroom but in our "imperfect", not dust-free environment and crafted who FoliX is determined the best choice! And for that, there's got to our "imperfect world" also 5 star!