Why the IN-Motion 300 PIR detectors?
In WebUI the camera (IN-3011), there is a function "motion detection" this I had turned in the time interval.
However, the problem was that this motion detection makes use of the "light / dark" movement. That is, each light change is recorded as a movement, even when the camera motion is the image Updated therefore be registered and an alarm is triggered.
This meant that I in which sensitivity level had hundreds of alarms matter.
What does the IN-Motion 300 PIR detectors?
When I connected the detector which children easily and without problems I have worked off the motion detection and external alarm input (IN-Motion 300) turned on. Here one has to pay attention to the setting in which WebUI Trigger Level you have set, otherwise there quickly 40.000 images since the detector Dauerscharf is! -D But that is explained well in the small manual everything.
The IN-Motion 300 is centrally suspended in the business area and now registers every change in temperature within 8m at 3.6m ceiling height in the room. If this temperature signature then from a detection field moves to the next, suggests the IN-motion alarm and the camera takes pictures immediately or Video. For me it is set up so that I get an alert email with attached images and additional images are stored on a local FTP. Perfect!
Conclusion:
The false alarms were due to the in-motion PIR 300 reduces to zero !!! That means no more false alerts!
I'm really excited and can the products of INSTAR only friend. Also the support is friendly, helpful, and solution-oriented!