A) PROFESSIONAL:
1) Laubsägebogen 'Pebaro 750' with large, finger-friendly plastic knobs,
2) In addition, a really unnecessary Laubsägeschlüssel for wingnuts
or lying here in the plastic knobs nuts.
3) 7 Laubsägeblätter (wood, middle teeth) in Pastikfutteral,
4) Laubsägetisch wooden,
5) Laubsägetisch ferrule.
6) Drills with
7) Three Spitz square drills (bag).
8) ruler, 1 meter, centimeter and inch pitch.
9) bristle brush.
10) 20 g Areas wood glue (wood glue Express).
11) Screwdriver 3 mm with wooden handle.
12) Screwdriver 4 mm with wooden handle.
13) gouge, flat 13 mm.
14) peen hammer, 100 g, GS and TÜV seal.
15) awl with wooden handle.
16) hand drill, wire type.
B) MINIATURE:
17) File, wooden handle, flat, 10 mm x 10 cm, all tracks with Slash.
18) round file (or reamer), wooden handle, not tapered, approximately 3 mm diameter x 10 cm, raspelatiger bat.
19) Kneif- or pliers, forged, 13 cm, handle distance closed 4 to 4.5 cm.
20) vice (Die Casting), smooth cheeks, a maximum of 3 cm Einspanndicke, maximum 2 cm thickness table
21) sanding block, 8 cm x 30 mm grinding surface, with tensioner
22) 17 cm x 30 mm sandpaper strips P100.
23) Plane, 35 mm blade with adjustable thumbwheel angle.
24) Try Square 15 cm x 9 cm plastic.
25) screwdriver, slit 2 mm, plastic handle.
26) miter saw, wooden handle, forward / reverse-Händer, decent 17.5 cm blade with easy of set, hardened teeth,
27) miter 90, 45 degrees from laminated wood (no hardwood), internal 25 mm x 25 mm x 16.5 cm.
28) Foxtail (Plastika 830000 Made in Germany) with usable 22 cm blade, grip strength about 3.5 cm, handle about 2.5 cm opening, plastic handle.
C) CHILD equipment
29) crank drill with wooden handles, chuck and a screw-friction drills,
30) instruction booklet 'saws with Siggi' 16 pages in D, GB, F, I, E, NL, H with illustrations - instructions for installation and proper use of the coping saw, here not 100% fit because two sides on the wing nut variant relate.
For my son, I have decided for this cabinet one hand, bearing in mind that I share the inventory of my received as a child coping saw cabinet (actually was-leaf designed as carrying case) still use, so that certain quality standards are worth the money in the long term. For this model, I decided, because initially presents no constructive hobbyists ambitions and too much parental patronizing when pottering the crank drill a motor challenge, while first and foremost my miter saw is the ultimate goal of desire of my son, as opposed to so called household sawing, of which here some free stood at his disposal. An executed without closed handle handsaw, I had acquired the set with a cheap miter, he had also been violently tried on the Christmas tree and mourns today, six months later, the loss due to broken handle. The planer will certainly myself variously borrow times with him sometimes.