Party Laser Class 3 high luminosity and low cost, with some weaknesses.

After it is quite schwerig to find a device for under 20 what I was good for something reasonably but very curious what arrives there.
One should definitely note in which retailers to order and that delivery duchaus may take 7-10 days, for me it came ordungsgmäß after 9 days on, it was correctly labeled and an invoice attached to the package, therefore no problems with customs.

About the device falls my personal assessment is as follows:

- There are probably various versions in circulation, sometimes with Euro plug, sometimes without. The effects (Pattern) are not always
selectable and with my unit there is only one Effekt.Dieser but is all the more astonishing.

- There are Class 3 lasers installed, thus already relatively highly luminous. There is one green and one red with a
Wavelength of 532nm and 650nm with 50mW and 100mW per.
It should be avoided at all costs reinzublicken directly since prolonged Exposion the risk of retinal damage
are possible. This is also the case in every disco, it must be clear only that it is not a toy.

- The Leuchtsärke and the effect per se are already impressive, even when using a fogger comes the
the laser good effect, but loses something natuer according to Intensität.In my case is the "star effect" and set it
beautiful to look at, in dunken space more so hundreds of small points of light "dance" at a fixed point back and
then jump in a kind of explosion to the next. More gibs not in my version, but you can live with it.

- The processing of the device is indeed in order, unless you are lucky not to catch a loose contact with, however,
the manufacturing tolerances very very generous. But taking into account the price it is absolutely in the frame, especially since almost
the entire device is made of alluminum, even the headband. That brings something dan grade back and is not
Off course. A fan has been integrated, which makes sense, since the laser diodes but can be quite hot.
In this regard, one should also note that one maintains a cooling interval of 20 min after 2 hours operation. It is not for
continuous use designed. While the case itself is little more than lukewarm, but it goes to the substance of the
Laser units, especially a maximum ambient temperature of 30 ° C is allowed.

- The manual is simply a small piece of paper copied in English, but still least understood and the
Most functions are self-explanatory.

- A Micro for response to music has been installed on the front and also works so far, however, have to be a certain
Noise may be present for proper operation.

- The speed of the motor and the light points can be continuously adjusted, but this is also a weakness,
because at slower setting, the engine no longer starts when restarting, so you have either a medium to
fast setting can be selected, or it must be restarted every new, built to the laser on the ceiling,
can be quite annoying that fact but already.

- In my case a Euro power adapter was included, which acts also well made, secondary circuit with 1 A output current.

Conclusion ------------ --------------

Despite little weaknesses, a device that is priced hard to beat and the Risk of minor defects or problems with the Customs, may well be taken in purchase, especially since it all goes the exception rather than the rule ist.Wenn smooth, it has however a super effect, highly luminous, well focused and intense color, more light will be found for the money hardly.