So that the product has now installed 2x in my PC, since I the LGA 2011 socket have with 2x 4 Rambänken. Have to say, these things reduce the temperature of my G.Skill Ram's quite a bit, before I came at full load with Memtest to an impressive 51 degrees. While this is not critical, but it erhizt unnecessarily the housing interior. With the 2 RAM coolers I lower the temperature in full operation now at 39 degrees, which is a big difference. But a rough shortcoming of those things is but the 4 pin Molex connector. Thus, the fans always run at full throttle, wodruch they are clearly heard from the housing. I'm not a freak Silent, but a certain standard should be inside what the fans do not reach so. My solution was that I cut off the end of a normal fan, at which a 4 pin Molex and a standard 3 pin fan connector hung. Thus I was able to hang the two coolers on my motherboard, have put there at 50% and already these things were inaudible yet with high cooling capacity. But since this was their own work, I can not attach to the RAM cooler and therefore can be found here point deduction, would otherwise be dinger Perfect.
Pro: + Can be universally befässtigen + Sint decoupled by foam rubber + Have a very good cooling performance
+ Lights beautiful blue thanks blue LEDs (This is more a matter of taste. Maybe too bright when the sidewall of the housing is completely transparent)
Contraindications: - 4 pin Molex connector, wodruch the fans always run at full speed, as long as you have no fan control with Molex connectors ready or homemade solution.
All in all, a product of gelungens G.Skill, would not be the shortcoming with fan speed, would it deserves all 5 stars.