As my e-cigarette always rolled on the table back and forth, I've even purchased as a stand. It is sufficiently well packaged and externally it seems very good at first glance. But if you look at the holes, you will experience how ugly are the holes. Lauter marks, which can be very bad of an e-cigarette. This I've even first repaired. Only not everyone has that opportunity. I got the styrofoam parts taken from the pack and cut into 3 round disks, which I then placed at the bottom of the holes. Thus, the e-cigarette, do not jostle as hard on the fooled, but the ground is already padded. On the stand is a good idea, but unfortunately lacks the finishing touches in the holes. I do not know if it was an old worn drill or something else. Therefore directly 2 star deduction, because the marks of an e-cigarette can be very damaging.