Result: The result is great (see photo). The magnetic effect is sufficient for us. Strong magnets hold list, etc. and for weak deco magnet can pack under the deco magnet still stronger. We have tuned additionally be filled cans from Ikea. If you're not too much into heavy fills keeping them.
Important:
1 .: The panel is subsequently smoothly due to the magnetic paint NOT. The surface is slightly "grainy" but this does not interfere with later label. If you want a smooth surface such as on a school blackboard with proof of what can come up with their own.
2 .: NO liquid chalk pens (there is also here at Amazon to buy) use. The Scripture goes definitif from no more. Neither with gasoline, cleaning supplies, and so on! ordinary chalk is best, this can sharpen for finer writing.
3 .: The paint may be slightly different light and dark at the transitions to the role despite having thoroughly apply. This falls afterwards no longer once you've labeled and wiped chalk. This is what a panel of halt.
Procedure:
Lie -MDF plate, drill 6 holes (every corner and mid / side) with a wood drill. Against the wall, holes and place the plate on makieren a protective film for painting.
F holes in the wall drill pure (6mm drill bit for example), dowels.
-Magnetfarbe: For this size of paint was enough loose for 3 layers. The 2nd and 3rd coat is easier when times is the first layer on it. You can use the same role for the layers. Between the layers adhere to the dry season (therefore lasts all well 5 days). I have the drive way, painted in the apartment, as otherwise dust and dirt flying on the wet paint. Who has a smaller plate, can calm even make a 4th or 5th layer on it. So much the better is after the magnetic effect.
Blackboard paint: With the 2nd part the first layer blackboard paint application. The paint smell quite unlike the magnetic paint (window).
After recommended drying time you need for the 2nd layer 3rd role as the paint is hard. Washing is not possible, it does not try :).
-Now The margins paint with a black permanent marker, which looks after from the wall as painted.
-After Can dry the panel then be carefully placed with 2 people on the wall tighten them. With or without washers is a matter of taste. If it is supposed to look as if there is no board but, then take the wall no washers and paint the screw heads with a Edding.
Happy potter, super the result we;)
