We noticed also that the knives are not very durable. Have now the third knife and after a couple of trips it is so dull that the lawn more plucked like is cut off. Have to two photos uploaded, maybe someone has a tip for me. At a cost of 29.90 per knife that's a bit annoying. Regrinding is not recommended as a unwuchtes diameter can damage the drive. I have no trees or shrubs in the lawn that can damage the blade through branches o. Ä.. When mowing twice a week the grass was never so long could it be because ...
For Android App: I think now all right, just needs a few minutes until it is connected via BT with Robo.
Addendum 04.19.2014:
Hab now already the second RC304, the first has been sent back unrepaired from the RM service partners, because supposedly no error was found ... that wanted me 43 euros to permit verification .... That's times a baseless impertinence !! Then got me luck with my dealer to agree, he then replaced him forward to goodwill with a new one. Well, charged, successfully completed installation program and he goes as it should .... perfect.
But under all I find the (customer) service of Robomow ..... great company.
At the moment I'm very happy with the mower, he is strong and silent.
One star deduction remains but because the service and returning a defective mower Robomow (or service provider)
Addendum 04.03.2014:
Meanwhile, I've noticed that when Robomäher the right wheel is spinning on the wheel hub, so it would also explain why the mower can not turn left curves. Has now been in any case be returned for repair. I'm curious....
-------- ------- Original review
Rasenroboter bought at an Austrian construction and garden shop. Arriving home, unpacked and read the very detailed installation instructions. Well, that can not be that hard ... I thought at least.
Our Garden: approximately 280 square meters in a rectangular shape, with a maximum 10% gradient in one of the corners, starting about the middle of the garden and a couple of dents by terrace, planters, etc. The lawn last fall has been newly created, limited with concrete edge strips and Mähkanten, is (was added later) grown fairly tight and the first cut was made this year with a Motormährer to facilitate laying the boundary wire.
Okay, so then, according to installation instructions charged the Robomow and placed in the meantime, the base station, relocated boundary wire using the supplied RoboRuler, all inner corners designed with 45 °, connected everything and started full of anticipation, the installation routine on the mower.
And since the problems started. The first two points (find the charging station and fix this) folded still wonderful. The next step, the "follow the boundary wire" made even more problems. Already at the first corner, the Robomow firmly. But it was not so, that would spin the wheels, it almost seemed as if the drive motors too little force to rotate the robotic mower. So it went from corner to corner until it was apparently the Robotic too stressful and installation mode has been canceled. Well well well.
So program the mowing time and intervals and off you go ....... No it does not. The wheels spin on the charging station so that the mower does not come out by itself. So nachgeholfen a bit, then drives off the Robo and boundary wire seeks to mow once to the surface in the edge mode. Theoretically. Hab of this very frustrating attempt a video uploaded to YouTube. Simply Robomow RC304 Edge Search Mode.
Well, then it works not at all times. No matter, just in programming mode disable the Edge Mode. Should maintenance not be.
The Robo mows then without edge mode in a random pattern the lawn, stops at the boundary wire and then continue in a different direction. Also theoretically. As mentioned above, my plot has a slight slope to one of the corners down. And precisely in this corner mows the Robomäher. And almost exclusively there. Of course we have at this point (about 15 square meters) no grass. The mower starts his Mähprogramm, of course without edges mode because of not so doing as it should, moves out of the station (maybe ....) and then 4 to 5 times across the lawn. Until then, he is in his corner. And there remain until the battery is empty. So to be clear, it depends nowhere fixed and the wheels also turn not he drives just stop in the area. Have them also uploaded a video on YouTube. It almost looks as if the heavier front drift with the rotating wheel in the direction of slope and the stupid mower can not compensate for that. Perhaps the Robo investigated even a gap in the wire to escape from my land .... wenns continues I fulfilled his wish ...
It is frustrating to watch the Robomow as he toils. As mentioned, the gradient has a maximum of 10%. The rest of the lawn is now 10cm high and at the favorite place of the mower I have no more grass ...
So at the moment I'm pretty disappointed and perplexed and thankful for every tip, so my 1100 Euros expensive plastic part at last doing what it should ..... lawn mowing. But what has us excited, the operating noise of the mower, which is namely a whisper.
Maybe he works on a perfectly flat, level turf, the perfect square without trees, slope or other disturbances, for me anyway is nothing at all.