Safety comes first

The wheel can be assembled easily, looks good and is very stable.

At first we were concerned because the handlebars can rotate 360 ​​degrees and no stop has. But that is for the safety of what we were able to convince us with a practical example. Our little one is overthrown by bike. Because the driver can perform a 360 degree turn, he was the fall out of the way and there was no risk of injury. For other models, the kids often fall down on the handlebars (even experienced it).

Initially made us the brake a little concern. If one it too tightly, it may be that she grinds permanently at the rear wheel. But even when set to "easy" it was in our case, partly to grinding. We wanted to change the wheel. But after some time, the problem has somehow done! (???) Through the many testing and adjusting the braking force, unfortunately the set screw has suffered a bit, because it is made of very soft aluminum. However, they can easily exchange for a better.

We had doubts at first because even if the braking force at all sufficient, because even before removing the brake, the bike can still push. But again, safety is the reason for this. Thus a dangerous emergency braking is avoided. The description is, that you should not use in sloping terrain the wheel. But even here the sufficient braking force and if need be will just been slowed down with your feet. It becomes dangerous, if necessary, when roads would be etc. to cross and an abrupt holding is necessary.