For product itself, everything was ready with no instructions and description. But no problem, because almost everyone today has Internet at home, if he can not, the module anyway send right back because you have to download the required software as well.
So for me everything is working properly with my Samsung TV and a Sky V14 card I can watch and record all the Sky channels incl. HD. I had previously CI + module of Sky, which I can not recommend any. Why?
The Unicam module compared to the Sky CI + module the following advantages:
- The programs open within 1sec, at the Sky module 2-3 secs..
- Parental control pin no longer has to be entered.
- Record of PVR is possible at the Sky module only time-shift possible and limited to approx. 1 hour.
These were also the reason why I have bought this module!
Another problem, the Samsung TV USER own hard drives format, which can not be opened with Windows! Whoever cares to and his films would like archiving, which was to buy a receiver with PVR function and CI module bay. But this is not the problem of the Unicam. but is due to the TV device! Unfortunately I can not tell you whether you can archive Sky records with another TV or receiver.
The module programming is very easy!
I have the software version Sparta USER 5:45, which is to download on ***. Unicam2.to/olduni.php.
In addition, still you need the Unicam Loader 1.1 is to download on ***. Unicam2.to/utools.php.
The module program:
Note!
Please use the programmer only on a pad which is not electrically conductive, so you can avoid causing a short circuit. This endangers your Unicam Programmer module together. In addition, a computer with Windows operating system is mandatory.
Step 1
Place both boards to himself and connect the USB cable to both boards of the programmer on. Which connector is in what part of the programmer plugged is not important.
Step 2
Connect the programmer to a free USB port on your computer. It appears the hardware dialog for new hardware.
Step 3
Now push the Unicam module with the label facing up on the long board programmer. Switch the toggle switch from the short plug part of the programmer. The red indicator will light permanently.
IMPORTANT: Connect the short plug-in part to the module NOT YET !!
Step 4
Now open the downloaded Unicam Loader 1.1
Step 5
Select the correct COM port from the programmer. If this do not know, click Start -> Run and type "devmgmt.msc", then press the OK button. After the Device Manager is open, press in Ports (COM & LPT) on the small box with the plus sign. Now extends the Device View. You should see a device that is USB Serial Port. Here's to see which port was assigned!
Step 6
If you have set the correct port, press the button Cam Image. Now select the file hernutergeladene Sparta 5.45 ending .uns from. Then a window appears with the message Wait for modules reset ....
Step 7
Now connect the small plug-in part on the module. Once the programming has reached 100%, the progress window closes. The module is now described with the new software.
Step 8
Switch the toggle switch from the short plug part of the programmer, remove the USB cable and remove the module from the board. That's it, the module should now be ready for operation! The Sky Map is the way inserted with the chip facing upward into the module, if you hold this in your hand with the label side up!
Depending on how fit you are, the fun takes 5-10 minutes and is really easy, can at this point not understand the negative reviews for this topic!