Used for LCD TV 26 "Toshiba 26EL934G. The position of the holes at the back of the TV (VESA 200x100) and the location of the power cord forced me to remove 5 cm high and 5 cm down on the two brackets (easy cutting with miter box and hacksaw) so they do not exceed and that they are pressed correctly on the back of the TV. The manual, though in English and in German, is perfectly understandable thanks to the drawings All necessary hardware is provided, unless you need to fix the bracket to a wall-plaster plasterboard. please have adapted Molly ankles type of plate that attaches dimensions. the wall is ideal for plasterboard, plaster, this allows space horizontally ankles and do not place one above another. I advise to perform editing by 2 people, especially during the bonding phase TV on the wall plate. The small built-in level bubbles media is unreliable, use a standard bubble level. No problem from the viewpoint of the strength of the binding material is quality. The orientation on the top and bottom of the TV is perfect for watching in bed The space between the wall and the TV (+/- 9 cm) allows easy cable connections. Remember to orient the two media: the screws blocking the plate should be down. Both mollettes blocking orientation TV should be positioned towards the outside. In conclusion, an excellent price / quality ratio.