Something goes past the point

According to the description of the manufacturer states that it sets such a filter on the air grille of the enclosure door or the air grille of the rear chassis fan. For this, the black frame is to put this magnetic dust filter and metal surfaces. Should the housing be slightly magnetic, you have a bonding frame, which is also magnetically for the filter frame and can be placed as a patch to the desired location.

So the idea is to first of all Top. The dense material really is keeping dust and impression of images and the good reviews was more than positive it.

So I got this dust filter in spite of the high price of 9.99 euros ordered once. Here for comparison: dust filter mesh of aluminum cost about 3 to 5 euros in 120 mm. So I was skeptical at twice the price of this dust filter.

So the filter looks in reality as follows:
You really get the above, only see the possibilities Montier bit different. If the enclosure door outside a balancing to the grid, the dust filter does not fit completely on it and sits on the outer edge not right on the case. The same at the rear case fan. If the surface is not completely smooth here, the filter is just not right on the metal. Usable, but but slips off at the slightest Ruckelei.

This is therefore not the intention.

Thus must exist for this filter absolutely smooth surfaces. This is not the case, this product is for the case to him certain totally unsuitable.

The quality of her ansich a good product. Unfortunately for my housing unsuitable. It shows unfortunately only after the purchase.