The Assembly:
First, the support arms were attached to the TV. After that you should check that the cables (power supply, HDMI, Lankabel)
still fit in between, because the distance from the wall is only 23 mm! After all cables plugged in and checked for tightness
were, I have this fixed by sturdy tape so that they do not move when mounting.
To mount the wall plate was made as follows. I penciled on the wall the center of the TV's. The wall plate
pushed into mounted support arms and found that is the center of the wall plate identical to the center of the TV's.
Now I have drilled a 6 mm hole in the center of the wall plate.
This hole has been associated with the wall marking in coverage and fixed with a small screw. Now you could see the spirit level
hang up and mark the four holes at rest. The rest was a formality.
The TV is now hanging on the wall perfectly.
The wall bracket I would buy again at any time!