To the internal values:
The adapter start very quickly after plugging while the adapter found and without further action immediately. The extension to other (Fritz) adapters is also child's play if the program or even the security button.
I use the adapter between two Fritz! Boxes as an alternative to WDS mode.
This works well with the current firmware on the box this as PLC (Power Line Client) are detected.
The transmission rate in this case at 250 Mbit / s (80 m cable length).
The Ping is also very low. (Similar to the good old LAN cable)
The program allows the individual designation of the adapter, and turning off the LEDs and adding adapters. Similarly, one can read the data rate to the other adapters.
The adapters are also compatible with the 200 and 500 series from other manufacturers on the basis of IEEE and are also listed in the program.