The saw is in weight (7KG) also good for mobile use. They can be screwed optionally fixed to a workbench.
Adjustment possibilities are abundant. Even little helpers for chucking wood are available and have been proven in practice.
The work makes this unit really fun. Simple cuts are made clean. Also angle and miter are no problem. They can be adjusted very easily and run anshcließend clean through the woods.
But please note the maximum cutting width of the saw. A deck board with 120mm width not quite get through the saw. It 1-2mm missing! 70x70er a bar not quite get the saw through also. Also still missing a small piece, because the engine is built on the bar. Here is Allerding entscheident where one sets the cut. Will you just a little cut, you can create from the other side and it fits. It can be the problem otherwise by turning the beam and a second sawing also solve. Who is not enough, which should take up a larger train and Kapp saw.
The saw is perfect for baseboards. I have therefore cut skirting lacquered and foiled MDF miter. The cuts were going super clean. Nothing has been frayed or damaged. Prerequisite, however, that the painted or foiled side is to the saw upwards. The result is then become really good.
Who wants to make here on their own cost-laying itself will be well served here!
In operation me the very good performance of the saw is made a positive impression. Even hardwood (decking + substructure) is cut like butter. Unfortunately fit with me at first the 0 degree position is not always accurate and the sections were thus not quite straight. A small adjustment of the zero degree position by a Schräubchens everything is only but again perfectly.
When starting the saw there is no soft start. The engine shall instantly with full force. The so a saw makes noise should be clear. I definitely recommend for such work earmuff.
The assembled blade is incidentally regarded as allround sheet. I have thus wood, as well as aluminum cut.
For pure woodwork, I would buy myself an extra sheet, which will deliver the very best results.
********** Update 02/2015 ***********
I saw the now almost a year in use.
I have processed a lot of wood in the time and the saw was accordingly used a lot. The cuts are still still very clean and the motor has power at the beginning.
The zero degree position is still working properly after my little adjustment.
The grass-catcher for the sawdust is not really helpful. While it is noticeable that the small blind after a while is full, but relative to the rest of the chips, which is distributed around the saw, is there very little in the bag.
The saw blade is still the first still. Hardly wear. TOP!
For the price, I can only say: Strike to the Handyman!