Day 1 with 5 stars
-----------------------------
Delivery on time, well packed and without any external damage. I confess at Market Place I am always a little uncertain, so this notice. The construction was carried out quickly. The manual is for me somehow not quite perfect: For the professional too much "text" for the layman too little and too many technical terms. so do not fish nor fowl. The building is only 2 person, because the packaging is still bulky. No criticism, just an indication.
The first cut: the engine is quiet and you can hear no reduction in speed (MDF E1, 22mm). My wife was curious and wanted sometimes saw (her first time). So you made the second cut. We can make sure that pressure and force distribution are different, because I have given her only the board and she had then cut. Now I wanted to know: how is the rip fence. The good old calliper a 50cm long tailored Brett measured: one side of me and a side of my wife: The deviation is less than 0.1 mm to 50 cm. I call but precision. My expectations were exceeded. The crosscut fence is a little shaky, but still adjusted. The carriage, however, runs without noticeable play (no wobbles) by - Perfect. The 90 ° angle of the saw blade is also given. So far, everything without any adjustments! What more do you want.
I should mention, however, that I've got the expensive Opti Wood with 60 teeth. The 24-he is then but rather saw for firewood.
What is really annoying is that the diameter of the exhaust pipe on the guard (above) is inappropriate to the vacuum cleaner hoses. What has the Ing. Thinking? If the way criticized in the Bosch forums. Next gripe is that an extra Y-adapter kit for 50 Euro must be purchased so you can use both suction pipes. Ok, at nearly 1,000 euros that makes 5%, but in the league, I expect a little more. Without suction "skin" is the chips about 3 feet back of the hotel. Even that is impressive.
In sum, I am so far impressed. The first results give rise to joy. One should immediately order the better to saw blade and the Y-adapter.
So far: strong buy recommendation!
-----------------------------
Day "2" with 5 stars
-----------------------------
I now have the angle on the carriage stopped because of sawn 90 ° / 45 ° angle had a deviation of 0.6 ° / 0.8 °. Now there are 90 ° and 45 °. The transfer was made on the small set screws and was simple.
In addition, I have now cut the first sheets of beech on the front side and on the long side to fit. With a hair angle I checked the cuts: there is no more hair fits underneath. The width I have checked with the large calipers: the deviation is less than 0.1 mm (showed almost "0"). Nachwie before, for me sensational values. We still talk about a TKS.
The slide runs geschmeidigt by the guide. The support surface and the extensions are sufficient. The parallel Aschlag fits perfectly. For this purpose a little tip: engage parallel stop back and take forward. Then gently push the parallel stop to TKS and then lock only.
For suction: I leave now suck the chips on the back and upper aspirate device. This makes an inexpensive Kärcher - purchased through Amazon - quite outstanding. There is hardly anything in the machine. Mir is also noticed that the engine of the GTS was fitted very well laterally, so that the chips on the engine fall over when not sucked. Because I've seen otherwise.
However, the Y-adapter kit, which I unfortunately could not buy on Amazon is a real letdown. The Kärcher hose is loosely fitted on the Y-adapter. It seems to me that this (diameter) and not the Kärcher hose is too small to large. In addition, the hose wagging (from the Y-adapter supply) at the extraction facility, so I had to help with the duct tape.
Currently I still clarify what that might be. that's it for the second report.