The trigger works with Lumix FZ200 really !!!

The Funkauslöser pixels Oppilas / L1 work right away with the Panasonic FZ200. At first I had the radio receiver on Lost. After the Quick Start Guide in images you want for 2 seconds press the small switch on the receiver. Then a red diode flashes. From reviews I know that you have to plug it with 4 contacts firmly in the big camera and the connector with three contacts in the small receiver. If you connect the FZ200 in P mode to, you can then already trigger the switch on the receiver on the camera. This is the function check for the cable.

The radio transmitter has 4 switch positions. From left to right:

- Single: Works. 1 press = 1 image

- Continuous: as long as you press made pictures. The time interval appears to depend on the duration of the image storage and seems larger than in position BULB to be, although I as a memory card with 45 MB / s using a SanDisk Extreme SDHC. Perhaps the period of the so-called bracket setting depends.

- Bulb: 1 keystroke starts probably the "right" continuous shooting mode. There are photos taken in a shorter time interval until a further keystroke the series is ended.

- Self-timer: it is triggered with delay.

I just got the camera 2 days after the order. That's very fast. The function test on the table was clearly passed. Distance test to 100 m (which I do not need) and the test intervals in series in switch position 2 and 4 will come later turn.

I had doubts, because there were some negative opinions. However, I am now very happy.
Reasonable price for these functions.