When processing is necessary to note the following:
1. The surfaces must be smooth, firm, clean, dry, grease and dust. If there is contamination, they can be cleaned with petroleum ether or isopropanol, without affecting the adhesive properties negatively.
2. One should, of course, the adhesive surfaces do not touch, thus they are not better. The adhesive should be pressed at least 10 seconds and will be charged only after 24 hours.
3. The material can be used both inside and out. However, the optimum processing temperature is between 15 and 25 degrees Celsius.
These processing rules shows that use of wallpaper would not be wise. It should advance the part of the wallpaper, to which the tape is to be applied, are removed and the wall in accordance with the recommendations to be processed. Very good to making the process but on tiles. It is also important always to note that the part, which is to be attached, and even get a tape. Therefore, one must carefully consider where an attachment is useful to ensure that the handling and use is not impaired.
By observing these rules, the product offers a sensible addition to drilling. The manufacturer advertises that you can open and close the shutter about 1,000 times without the adhesive force decreases. 10 cm to hold about 330 grams, or more holds more. Logically.