Connection cable: Each complains about only 20 cm length - >> ignorance. We like to put a maintenance electrician can for radiators - especially if there are several. Also - because regardless of spotlights - is always fumbling on the circuit a shit as soon as it hangs on the wall.
- Reasons:
- Measure voltage in the can.
- Disconnect For Maintenance
- "Tradition": Halogen and motion there was ever "Cheque Moments" and one or two sailed off the ladder.
- Convenience
In addition, please the soldered wire ends are removed, equipped with ferrules and in the box you will then WAGO Lighting Connectors.
Whoever opens this - for whatever reason - risked just that the spotlight IP65 or just afterwards is no longer no longer as tight as he came out of the factory. Why do some have it open - I can not understand - especially since the cable gland for NYM 3X1,5 is not suitable and there already a line is off. But that also sees only an expert. So let !!!
With motion sensors note the minimum switching capacity and best with a relay. Other switch with a thyristor - and may cause voltage spikes, where the electronics zerschießt in spotlights.
Who wants a with motion, to buy a - where a is tuned.
I hang and no trailer to a car - where the trailer does not match the vehicle.
Otherwise: Yes, he lights up and I'm happy.
