The mainboard MSI890GXM-G65 is a very good alternative:
-Only The German MSI page LAMT with the support therefore the global benefit.
- Bios 1.B0 has arrived and with it a lot of new features (CPU Bulldozer).
Mainboard Form Factor: Micro-ATX
CPU Support: of: // Sempron Phenom II X2 / X3 / X4 / X6 // Athlon II / x2 / x3 / x4 // bulldozer AM3 +
Chipset: AMD 890GX and SB850 Chipset
Audio: Realtek ALC889
GBLAN: Realtek 8111DL
Equipped with:
2x PCIe 16 - Gen2 (1x16, 1x8)
1x PCIe 1x,
1x PCI,
1x IDE Ultra DMA 66/100/133 (they can leave out)
1x DVI / HDMI 1.3 / VGA (with either DVI or HDMI, VGA always,
2x USB 3.0 fully backward compatible to USB 2.0 and 1.1
4x USB 2.0
5x SATA6G Intern
1x External eSATA6G
1x Realtek LAN 10/100/1000
1x IGP Onboard VGA ATI HD4290 with DX10.1 (MSI here have a DX11 spendieren can (perhaps in a Rev. 2.0?))
1x Optical SPDIF
1x Side Port Memory 128MB
CPU - APS throughout to reduce power consumption.
4x DIMM slots for DDR3 800/1066/1333/1600 * / 1800 * / 2133 *
3TB + Infinity improve disks Efizienz and connect 3 TB hard drives possible.
USB Safeguard - Can USB devices protect against short circuit / antistatic damage
Since buying I can only praise for this board,
only the graphics card would house can be from a DX11, but bask 100% Top
The external USB 3.0 I do not want to miss left me with USB 2.0 entirely replaced as noticeably faster
--------------------------------------------------------------------------------------------------------------------
to help:
Always the latest USB 3.0 host controller driver by (Renesas / (formerly NEC)) Latest Version: 2.1.16.0 or later
Use.
--------------------------------------------------------------------------------------------------------------------
Firmware Update for all motherboards with tachos extra chip for USB 3.0:
For this man was to bring the "Onboard tachos chip" on the latest firmware:
Last firmware version: usb3_firmware-302708