Due to acute problems of space on my desk, it was necessary to my new 20-inch monitor (Asus VS208NR 50.80 cm (20 inch) LED monitor (DVI, VGA, 5 milliseconds) black) to install so that it on the desk as little as possible Place needed. A wall mounting was (and is) not possible, so I'm also encountered this product. The first postive surprise equal when unpacking the package very quickly supplied: the holder more highly stable and high quality, therefore it is not easy but that is in principle not care. The weight limit of 8 kg (for monitors) is usually not a problem, there is probably no 22-inch monitors, which bring more than 8 kilos, also the holder acts as if he could, if necessary, also with more than 8 record kg. The assembly was absolutely no problem (not really needed) instructions is simple and you will immediately understand how to configure the holder. There are provided all the necessary parts. Even at Disantzringe including longer screws for mounting the VESA plate on curved monitor housings was thought thus can be any screen with 75 x 75 or 100 x 100 mm VESA-wall mounting this bracket to install. If you now have screwed the standpipe at the desk, it is recommended to screen to screw to the VESA plate, this one should use the supplied washers, otherwise leave the screw heads some space to the plate and the whole construct wobbles. If one sets the horizontal holder on the standpipe, you have to "only" the screw on the holder with to the supplied Allen wrench tighten. This requires a lot of strength, and you should be aware to what extent you want to have the window viewing, otherwise you have to open the screw and close again with great force. The screen can be retrospectively adjusted so hardly in height, all other avenues are open, however: The tilt and rotate the monitor, as well as movements to the right, left, front and rear are possible. Generally these adjustments go pretty sluggish, but probably has to be, so the screen does not move from smaller external influences. May need the joints indeed a small "Bewegungskur" to function more smoothly, but you do not adjust your monitor so every day and once a postion is found, the screen also moves no millimeter. Even if you accidentally times abuts the desk is not a problem, the whole thing wobbles a bit and you're done. Very impressed gave me the cable management, even if the loops were slightly larger may be, you have very fumble already until you have DVI and power cables properly routed. The cables are routed along the bracket down and are therefore not just at work, but are led almost directly to the PC. Great praise!
Conclusion: A very stable support for small screens with top cable management and many adjustment possibilities. Only the height adjustment is not easy, but all in all 5 of 5 stars because I think this is the price to be appropriate.
Note: All experience based on the use of the holder with a Asus VS208NR 50.80 cm (20 inch) LED monitor (DVI, VGA, 5 milliseconds) black to other monitors I can not say anything binding, but in principle should all be similar, as long as the monitor is equipped with one of the two described above VESA wall mounts.