Delivered is a fully disassembled slatted frame with assembly instructions.
The assembly is relatively easy when you sent lining up during mating and screws and if you have strong hands.
I have included various cigarette breaks and without rushing just under 3 hours were required.
Quality and comfort:
When assembled the slatted frame is very stable and noise-free (Note: I have a very solid wooden bed).
Compared to my luxury bed bases (price range EUR 400) from another manufacturer, this slatted frame, much more stable (= small children can jump around on it without breaking the bars).
I also like that the 140x200 version has two separate deck areas, because I abusing the bed as a double bed.
Side effect: The rust is it quite hard and the hard center bar could be annoying with thin mattresses.
Since I have a very high quality spring mattress (25 cm thick), I feel nothing. Well, I also found that the rust is very flat and so the mattress can lie deep in the bed box, without protruding far.
Additional information:
- Three nuts had very bad thread. The thread I had to re-cut so they fit.
- A set Kunstoffleistenhalter remained as a substitute
- Custom-fit assembled the measure was 139x199cm. Since you can move the corner angle, I could broaden the measure easily on 140x199cm; a length adjustment is possible because the length of which is predetermined by the central web.
- The corners are rounded. This could be a problem in beds that have support points at the corners and was where saved on lateral support rails.
- There is a tendency like to buy adjustable bed bases. My practical experience is that this feature is for large and heavy mattress never used (= waste of money). Thus, the narrow botene here Late rust is quite enough.
- Because of the hardness I recommend mattresses beyond 20 cm thickness. I had on a transitional basis unsprung mattress (15cm) used the back pain was almost unbearable and you could see every single strip of wood.
- As the bars are very close together, a mattress protector in my opinion is not necessary.
- According to the manufacturer (the information can be found in response to the negative reactions) has a central support at this width to be present! Without restraints under the crossbar of the frame can break. The information should be of interest to those who own a bed without intermediate support.
Conclusion:
From me there is a strong buy recommendation. A grate in this size and quality for less than 70 EUR incl. Porto is virtually given.
Supplement May 2013: Allegedly a new version of the framework is now being delivered. What changes have been made to me are unknown. However, it is not excluded that this Rezi lapses. My frame was delivered in December 2012.