However, the handle does not attach the projector with enough inclination to illuminate the bottom of the wall. The plastic sensor unit quickly come to a stop on your wall. Moreover screws sensor unit will allow water to stagnate, and the three settings which is provided this projector:
- The detection sensitivity adjustment
- Adjusting the lighting time
- Twilight setting (you measure out from how much ambient light, it authorizes his ignition)
- Lateral adjustment of the sensor unit (especially to the right, as the race left stumbles fast enough)
The solution would be to position the sensor on top but with the risk of rain water infiltration at the electricity supply, probably the best, adding a bit of silicone around the wire where it enters the box, to prevent any infiltration of water ... or buy a rubber sleeve and insert the power cable to the wall inside.
Another problem I have acquired several projectors 20 watt warm white (cool white LED is harmful to the human eye, do your research ...), it actually consumes 22 to 24 watts measured. that in a pinch it can go.
But the promised power is not at the rendezvous, the light output (lumens) does not exceed 100 watts in equivalence to a traditional projector.
___________________
Small technical reminder: Bulbs:
The reference to say "equivalent ... W" is the old incandescent lamp with a ban on the sale began in 2009.
Incandescent lamps existed only in some models of power and almost always offered the same brightness in lumens
(Despite their varied forms, the piece of filament was always the same). We had the matches:
15W = 110 lumens
25W = 200 lumens
40W = 400 lumens
60W = 710 lumens (sometimes 660 lumens bulb on small formats)
75W = 930 lumen (or lumens 935)
100W = 1340 lumens
_____________________
More details below
Product for any record is provided in the package, or indication on the carton, provide your own mounting hardware depending on the media)
Body: aluminum
Cover: glass
Sensor Head: plastic
LED Type: COB (1 x LED)
Light color: white
Color temperature: 6500K to 3500K and cool white to warm white
Luminous flux: 1400LM
Lighting Angle: 120 °
Power: 20W
Working Voltage: AC 85V-265V
Waterproof: IP65
Dimension: 180mm x 140mm x 100mm
Range: 5-10 m
With the intelligent recognition function day and night, it does not light during the day, Lights from 25 seconds to 3 minutes during the night when someone comes within the detection distance
Adjustment:
1. LUX: Set the working time (day or night)
A. Position SUN: the sensor will be at work all day.
B. Position MOON: The sensor will automatically work at night.
2. TIME: Adjust the sensor delay time (5 ± 2 s-1 ± 4 min) --- the sensor delay is the one whose sensor needs to étindre after detecting that people have left the detection zone.
3. SENS: Set the sensor sensitivity (usually no need to adjust it).
Warning: a person perfectly still before the switch will not be detected: If it is turned on once an intruder standing still light will eventually not be extinguished ...