I installed the part under IOS 8.xx via an iPhone 6 and a FritzBox 7490. Bluetooth must be switched on, even if one is specifically oriented to WLAN in the connection, but will not work all somehow.
With the Fritz box one should under WLAN> Security not forget to deactivate the option "Do not allow new wireless devices" briefly, otherwise of course goes even nichts.Manchmal I fall purely on because I forget the rarity Roads.
Very useful is the Withings nowhere documented point to a Factory Reset, which was described in another review: back, press both buttons for about 15 seconds until the confirmation appears in the display.
Withings apparently assumes that you scoured the depths of the Help Center in the network, if you have questions.
2 settle compressed A4 pages, would clearly better.
For example, the question of air quality. Why will not appear in the app when I press the center button silver? Because that is transmitted only during weighing. And why is the value at a time but there? Because the scale automatically transmits without weighing every 14 hours. Aha. And why not practically every hour? I do not know you. Because of this and probably otherwise not hold the four Batteriechen long.
From the depths of the Help Center to the frequent desire here by measurement of the water balance (meaning):
Lt. Company would probably not be a problem over the sensor. This value but do you measure to a special medical meaning and interpretation. It has decided not to set this value in the consumer sector with consumer hardware. Aldi has since apparently fewer problems when the scales sell.
Recommended I think it is to go into your own account in any case, under [...]. There you can see the MAC address of the scales, so that they can assign the router. Also with me the displayed city was removed in terms of the weather 30 KM. Enter unhooking at "Automatic" and town by hand. The measurement data of the scale there are also times graphically represents well.
The installed firmware version (currently 1311) and others can be seen in the account. If a new firmware is installed automatically or must be triggered manually, just do not open up to me.
The pulse measurement previously worked up at once. I have the impression that one is to better a bit forward on the scale, as too far back.
Body fat: If you open the Web account at the email address and click parameters, see below Click "User" the point "model of body composition" The choices are "Model 2011" Athletic Version 2011 "and" 2011 version of Japan " ,
In the app itself under Profile, and down there "Advanced parameters", you can only choose between "athlete" on or off, which according to the above description text in the app's position on off = Japan means. Wirrig all. The app makes me the difference of 10% between submission athlete (13% body fat) (hereinafter: Japan) to off position with 23% (realistic).
If I let the athletic part time away, I do not understand how the web account "Model 2011" and "Version Japan, 2011" to the OFF position in the app with then referred to as "Japan" version, correlated. I've found on the Web account times on "Version 2011", because in the depths of the famous Help Center times somewhere of what was, as a further development of the version of 2010.
What has really priority, app or Web? Is Japan the App now the same as 2011 version on the Web account? Includes Japan, the Asian region meant due to a different physique, or what? And why am I now "Japan" in the app (in OFF position)?
It is possible that even at poorly translated terms, but a certain lack of logic is the thing so now held. I'll let my body fat these days times professionally notice to investigate the matter.
4 stars because the part makes now technically what it is. But the French firm Withings has yet to properly work a lot at the operating and Explanation Front and the unity between app and account.