With drawbacks still usable machine

Drills should you buy as much, always 2 numbers more stable than we think need to. This ruled out the zillion different little table models and affordable choice is thin. You end up quickly at the cheapest Einhell 801 or essentially identical, but more expensive machines like Woodster etc. and think: why not? The properties on the paper are attraktiv- (and if there were such a thing as a serious quality control of Einhell, they could be in practice).

Packaging is ok, the structure simple, and more and even fits. Impression: halt Chinese; everything radiates somehow from the austere charm of a Kyrgyz Kolchosentraktors 50s, coyly complemented by modern Laserfirlefanz. Impressive is the possibility of variator, also works; the laser is switched only once, then never again (line width about 1mm = useless lighting would have made more sense).

The first device I had to go back because the drill spindle had Bash, who spoke rather for use as a vibrating machine. The upper drilling table was pretty bad milled and he stood 3mm higher than the otherwise quite praktische- roller rest. The rest went.

Machine no. 2 had also the blow, but less. Causal research revealed eventually, that he comes from the rather bumpy and uncultivated current variator. If you adjusted the lift guide the spindle very sharp, it is bearable (small countered grub screw behind the depth stop on the left, honored in the demand -stationary SYS. Needless to say). But that is not so simple, because the precision of the guide leaves much to desire.
The crank of the drilling table-height adjustment slackens at no. 2 completely loose in its housing, (for it is not as stiff as in 1.). The chuck is as well specified, unsuitable for small drill, it will be replaced by another gets low in the Cove-.

So have I thus decided to keep the machine first because it just barely is an alternative in the size. The quality of dispersion in Einhell's just the way that you actually from 3-4 machines pick out the useful parts and unite to would have, but.

Postscript: for now one year use (about 20-25 hours), the entire spindle guide powerful game developed in all directions, at full exit 1mm. That argument can not be dealt with readjustment of leadership. What's lies - ?? Should the machine completely disassemble to investigate. Evil, evil; I would now recommend it: Stay away! I therefore again subtract 2 star, so there is still one that Mr. Einhell can prove to be religious to drill the chest (but should to take a more precise machine).