Already, it is very small, about the size of a square postit block. No visible antenna, just a start / stop button, a button for WPS pairing of a client, and a reset button.
Three are now seeing on the front, the first indicates the status of on / loan, the second link with the wifi router (red, orange or green depending on the quality of the signal), and the third indicates the traffic passing through the repeater.
Point software to install, no CD in the box.
A simple little guide which explains why it is necessary to connect the device, then connect to the wireless access point named NETGEAR_EXT.
Then by launching a web browser, setting tutorial begins.
It will obviously know the name of the access point and master password. Personally WPA TKIP with a Linksys router, no problem connecting.
You can also assign the repeater, a different combination of the original network, since it is a second access point.
The repeater then rennomera default name of the existing access point monitoring _EXT.
The name is changed, however like many settings through the management interface accessible via the IP of the repeater.
Despite the lack of external antenna, the scope of the existing network is very much improved, provided that the repeater is placed at a suitable location.
This small device is very simple to implement, is not very expensive.
Note That a comprehensive manual in English are on the site Netgear, he explains in detail including how to set finer repeater or update the firmware.
I highly recommend it!
