In the hard-wired installation I proceeded as follows:
Printers connected via USB on the print server -
- Supplied LAN cable at one end of the print server and at the other end
connected to my existing network (on a switch)
- AC adapter is connected as a power supply
Now the software-based configuration:
The instructions that came, I paid no attention because the instructions only for
Windows computer.
I first entered the IP address of the print server in the web browser (standing on the part printed below).
Here I did not reach the print server. After that I made a network scan by IP address.
Because in my network a DHCP server is present (will be in most of the case), it has the print server
can enter an IP address from the DHCP server.
Once I knew the address, it was no problem to me access to the web interface of the print server.
Because the printer has also been recognized.
Under System Preferences -> Print & Fax, click on the Plus in the list, then it is also
already displayed. Select correct driver and click Add.
After a test page from the Internet and printed out it worked flawlessly, so
easier to configure it almost can not be.
Tested on a Mac Pro with OSX 10.9 (Mavericks) and on a MacBook Pro with
Mac OSX 10.6.8 (Snow Leopard).