*** Link to manual ***
kurzlink.de/gQjCLr9XO (. Copy in the browser line and press Enter it does not work in your browser, you still put http: // in front of it.)
*** Link to the robot forum with tips num Neato ***
Also interesting is the German robotic forum where you can get lots of information and advice. There is for technology enthusiasts also a thread to read by the conversion of NiMh is described on LiPo batteries:
kurzlink.de/uy539oQsR (. Copy in the browser line and press Enter it does not work in your browser, you still put http: // in front of it.)
If you help these links, I am pleased with a positive rating.
*** Volume measurement with various brushes ***
1) volume of the original brush
I measured with a dB meter the sound pressure of the original brush:
84 dB directly on Neato, corresponds to a busy street, an alarm clock
70 dB at the level of the ears (1.70m) corresponds to street noise, telephone ringing
2.) volume using the appropriate brush Vorwerk (25 Euro)
71 dB directly on Neato
58 dB at the level of the ears! The brush itself is heard no more, but only the sucking sound, which is much quieter in the volume, as a normal vacuum cleaner or an upright vacuum cleaner.
Conclusion: With the original brush Neator is actually worth only 4 stars. With the very good Vorwerk brush is the only at a 5 star unit. Brush Vorwerk is indispensable!
*** Tip to better filter ***
I have now retrofitted the following filters:
4 HEPA Pet and Allergy Filters for Vacuums Neato XV11, XV12, XV15, XV21, XV25, XV Signature & Vorwerk VR100
This filter keeps more back, is much more stable and has better build its higher air throughput. The surface of the filter is such that it can be cleaned much better during suction with a vacuum cleaner, as the original. The pores of the filter set to not as the original filter. A worthwhile investment!
*** Tip when the suction power decreases ***
If you use the Neato the Erte time, then keep your hands on the back of the air outlet around to get a feeling of how much the air flow must come out of the Neato back. If after a few weeks the suction subside and you notice that the Neato no longer absorbs everything, then check again the air flow behind the air outlet. Is this significantly lower, then the dust filter in the Neato must be replaced. Although this visually still looks quite permeable, so it is added by very fine particles, so that the Neato contrast no longer arrives. You will soon notice after replacement with a new one, how much stronger the air flow at the air outlet.
*** Tip for cleaning the brush ***
Over time, hair wrapped around the brush and the brush Vorwerk the brush hairs are clogged by dust. Take out the brush and cut the hair with scissors umwickelnten each at one point by. So, entire bundles easily removed. Take the cap off at both ends. Then the axis of the brush is visible. There are also hair wrapped around the axle and brake the brush. The brush hairs are best suction through a normal vacuum cleaner (if you have one). Otherwise, can help to brush the dust from the brush hairs an old toothbrush.