Short prudent for what purposes, I really need the saw I bit my solid at Proxxon and the choice fell on the DSH.
A stable and orderly superbly finished construction expects a while unpacking the machine. With about 20 kg, it is stable and not slippery on a base that should not be too smooth, because some back pressure, depending on the material thickness, for sawing is needed already.
The saw is still assemble final with a few parts, but this would succeed even without the very good instructions. The worktop is schwenbar and is free to open a small thumb screw. Number of degrees set, screw and saws. The smooth-running engine and the stroke of the saw hardly produce vibrations. Only the transparent Kunstoffblattschutz is annoying. But the one must not attach yes. I let him off completely.
With two reasonable speed contest can do without a variable speed control. I use the saw anyway almost only for woodwork.
The bladder management to remove the sawdust at the desk will automatically fire and is quite nice. Who does not like pulling the hose at the top of the saw and is good. On the side rear of the saw is a connector for an external vacuum cleaner. For this purpose, a rubber adapter is attached, which is dimensioned with security for the suction of Proxxon. My normal sucker - and this is also the only major negative point - does not fit with the tube in the adapter. But that's not bad. With a clamping pipe from the hardware store do you get connected even his own vacuum cleaner.
The leadership of the saw when the Hubpendel runs quietly and without coming out of the "trace". The saw blade must be curious enough, but not too tight. How ... is explained in the manual. Plucking with your finger on blade produces a bright tone. Who wants to listen to it, should make the time out of the box in order to memorize the sound. The next time you have an extra blade change Kanghilfe.
About Proxxon, or other spare parts suppliers are obtained almost every spare part and at very reasonable prices. Thus, it is the cost of replacement would be no knock-out criterion. In many other devices you pay almost as much for a spare part as the whole unit would cost new.
I'm excited about this machine and have acquired a great tool for my needs. The DSH I would buy immediately.
