These phones I tested with the original charger:
Samsung S3mini -> do not load!
Samsung S3 -> loads with max. 1A
Samsung S2 -> loads with max. 0.5A
Huawei X3 -> loads with max. 0.5A
While indicating the phone under Status "AC mode", it is not long loads with 1A.
In short, I have the charger for the DCP SHORT MODE rebuilt, in which I, as described often, depending on a 100 Ohm SMD resistor (1206 od. Minimelf) betw. The data pins 2 (D) and 3 (D +) soldered have. The voltage divider resistors on the data pins must also be removed, otherwise the Galaxy S2 invites only 0.5A.
Here are the results:
Samsung S3mini -> now loads at least with max. 0.5A
Samsung S3 -> loads with 1A
Samsung S2 -> loads with 1A
Huawei X3 -> loads with 1A
Conclusion:
Without conversion invites only the S3 with 1A. Obviously, the S3 has a USB Dedicated Charging Port controller detects the current Lademodies, also from Apple. The Samsung S3mini out of the ordinary and remains a mystery to me why it does not load with> 0.5A.
Half a point deduction is available for the jiggling and not tight fit in the vehicle socket. When pull out a USB cable pulling the charger right out with. The feathers I have further bent outward and that was enough for a tight fit.
In Golf 6 he stands out good 5mm from the front cigarette lighter and rear trunk socket. The lid of the cigarette lighter can be multiple but still close.
Update:
I got the Wicked Chili support the replacement type "Model 104 V2.0" and works like the previous conversion. Class. A thanks to Mr. Schmetz.
That is the full name of the new charging adapter V2.0:
"Wicked Chili Cars DUAL Smartphone & Tablet Quick Charger Adapter for Samsung, Huawei, Sony Ericsson, Nokia, Blackberry, HTC, LG (V2.0 / 12 / 24V, 2.100mAh, 2x USB)"