If you have time understood the principle, as introducing the Micro SD card
(Open roughly similar principle with and slide like some mobile phones -
it can be conceptually oriented times)
doing great and the card works.
The only problem:
The RaspberryPi board becomes thicker down. While it is not much, but probably because many
RaspberryPi housing in a very narrow pass tolerance gefertig - So my body of TEK-BERRY,
encounters during the assembly of the housing of the adapter already at the bottom of the housing bottom. Would not
further bad, but my body just really can then "PRESS" and is close
when the housing-plastic closures rather live. In other cases may be
the whole thing might not even close. Too bad. When the housing construct the Euere
Might have given housing down 1-2mm more space it would super fit.
Since there are many housing for RaspberryPi, although at first glance quite identical
are made, but perhaps differ positively to the 1-2mm - Would it be
not bad if here would post someone if he happens to have a housing the
Problems not aufweisst and everything in perfect harmony. So have other also gets his.
I pull off a point because it technically is, but it provided by the seller nowhere stated
is that there might be problems with housings.