T-Flash TF Micro SD card adapter module for Raspberry

Categories


  • Arrows necessary  

    T-Flash TF Micro SD card adapter module for Raspberry Pi Model B Board - 1 piece (Personal Computers)
    For me some arrows was necessary so that fits properly. Now the adapter is seated firmly and the card but damn it also.
  • good idea but could be improved  

    T-Flash TF Micro SD card adapter module for Raspberry Pi Model B Board - 1 piece (Personal Computers)
    Unfortunately, the motherboard is about 1.5 mm too large. Both short sides (white with "LOCK" and "UNLOCK" above) must be ground slightly before the adapter at all in the "raspberry" fits and also no longer clamped. Buy 4 pie
  • somewhat opaque mechanism ..  

    T-Flash TF Micro SD card adapter module for Raspberry Pi Model B Board - 1 piece (Personal Computers)
    .. But when you get there, you get into the SD card and it is on RaspberryPi nothing more. A file should have at hand, since the part is bad burred and therefore are difficult to come purely goes into the socket
  • No more shaky SD card  

    T-Flash TF Micro SD card adapter module for Raspberry Pi Model B Board - 1 piece (Personal Computers)
    One of the recurring problems in Raspberry are malfunctions of the RP by poor contact of the SD card: Depending on the manufacturing tolerance of the SD adapter and the thickness of the SD card installed, it is often an insufficient contact between t
  • CAUTION when using a RasperryPi housing !!!  

    T-Flash TF Micro SD card adapter module for Raspberry Pi Model B Board - 1 piece (Personal Computers)
    Previous speakers there have already brought to the point. Here again my comment. If you have time understood the principle, as introducing the Micro SD card (Open roughly similar principle with and slide like some mobile phones - it can be conceptua
  • Does exactly what it is but ...  

    T-Flash TF Micro SD card adapter module for Raspberry Pi Model B Board - 1 piece (Personal Computers)
    I specially chose this adapter because this adapter ordering the Micro-SD card in the vertical arrangement, all others were horizontal. - Why I forgive only 4 stars? - Logically, the adapter is so thick that then the connectors on the PI housing no l
  • T-Flash TF Micro SD card adapter module for Raspberry Pi  

    T-Flash TF Micro SD card adapter module for Raspberry Pi Model B Board - 1 piece (Personal Computers)
    Why you have only accidentally tripped over. After I understood the mechanism .... If everything goes and nothing looks more class outside. Technically: top function since 3 days continuous operation my Pi is still running, I write degree by him ;-).
  • T-Flash  

    T-Flash TF Micro SD card adapter module for Raspberry Pi Model B Board - 1 piece (Personal Computers)
    Super sub, just for the Raspberry. the Raspberry Pi has indeed a normal SD card slot and therefore the map is always In addition, and can then easily break or damage the slot. The adapter module the SD card is safe to Raspberry canceled and is no lon
  • fits perfectly with it in a Raspberry Pi nothing stands out  

    T-Flash TF Micro SD card adapter module for Raspberry Pi Model B Board - 1 piece (electronics)
    Had previously tested a similar product, but where the micro SD card is inserted rotated by 90 ° compared to this product. There were problems with the slide-in slots on the chassis, there was still something of the SD card. This is not the case here
  • Not suitable due to the thickness of each case.  

    T-Flash TF Micro SD card adapter module for Raspberry Pi Model B Board - 1 piece (electronics)
    The adapter can be due to the thick board in the slot push harder than conventional, forward flattened SD card. The total thickness leads unfortunately to the fact that the Tek-Berry housing no longer be closed. Too bad.
  • Finally, the bad connection of the SD card are gone  

    T-Flash TF Micro SD card adapter module for Raspberry Pi Model B Board - 1 piece (electronics)
    I had massive problems with the SD slot in my Pi. Normal SD card inserted because so relaxed in there, that there were loose contacts repeatedly - then is the whole Pi or makes any botch. Since then I have this adapter in it, the problems are gone. H
  • Rework necessary  

    T-Flash TF Micro SD card adapter module for Raspberry Pi Model B Board - 1 piece (electronics)
    Since I plan a project in which every millimeter counts, I got myself this adapter. However, I had to do some rework and trim the adapters on all four edges with a file. On the short sides since it would not otherwise fit in. In the first test it was