The shelf is really processed absolutely cheap, the sheet bars are of the stability comparable to the plate in a PC case. The soils are thinnest particle board, because each shelf is more stable in a 20 Baumarkt-shelf.
The building is absolutely annoying. The corner poles in my copy did not have 90 ° angle so that the "feet" ever-ranking by force. Here you really have to watch out for the first time, to avoid injury to the metal. The "plug-and-eye" on the corner poles sometimes have as much or as little tolerance, that it is difficult to put the connecting parts. You really have to always look perfectly well that the connection also is straight and does not get out to the profile strip "back". This was partly to accomplish only by a small screwdriver, which was used to block the "back door" of the plug-and-eye while it has been pressed, the connector with the hammer. The floors are only loosely on the scaffolding on (which can be seen if you look closely or in the product image, for example, on the left side), the profiles of the metal strips are too low to the ground completely enclose and are also not 100%, so it that not really provide protection against slipping of the soil. I have the floor now specially fixed with duct tape to the metal strips. Otherwise I would worry that I meet the floor every time I take something off the shelf. Overall, the construction has cost me ne good hour of time and a lot of nerves.
How feasible is the thing in action, must be seen. So now there's definitely first only 2 stars.
