#### Equipment ####
The fan consists of motor unit basket (2 pieces), pedestal. An instruction manual and the screw for closing the basket.
#### Processing ####
Plastic. However, some negative points fall on At first glance relatively neat, on closer inspection:
- The base is not complaining, a tilting of the fan therefore impossible (not provided, I think, see Features)
- The motor vibrates disturbingly loud. One floor down you can hear through the body sound the fan still. Although I have put him in addition to bubble wrap after I noticed that. This really is not now. Even on the lowest level and without pivoting movement, the vibrations are disturbingly audible, so I have not run it unless the heat inside was worse than the noise by the fan
- The fan off and on rattles during the pivoting movement
#### Features ####
Three stages and, as we know it by DIY fans, with a plastic pin drives the motor in addition to a pivoting movement. The switch for the speed to be mounted on top of the motor part of others have already criticized here, and I think that's inappropriate.
The fan does not tend to be! Although it is a screw exists that suggests otherwise, but the resulting adjustable tilt angle is not worth mentioning (VLT. 2 °). There, a metal plate is inserted, which prevents tilting, takes you this, this is possible in principle, but then is a easy to see why the cool air fan can not be prone: It falls after a certain period, due to the carefree stand and the high vibrations around.
#### Conclusion ####
o Price / Performance
- Processing
- Very annoying vibrations
- Switch on ungünstier position
- No tilting possible
- Carefree stand
Stay away from this fan and buy yourself another. Of course I do not exclude that I might have caught a "Monday Model", but my review is now again on what I got delivered.
Suggestions for improvement are welcome at my reviews.