EDIT from 18/04/2015: I've gotten the slatted frame for another bed bought again and lo and behold, the manual has now been fundamentally changed and is now usable. Quality is ok, even after prolonged use of the first grate.
Now I give like 5 instead only 4 stars.
All good!
The enclosed assembly instructions however is a joke. Something Misleading as this note I had long since ceased in hand. Unnecessary and partly incomprehensibly twice reprinted little picture, which as little statements like the five brief instruction sets. In the written description will then also for one and the same object used two different terms, to the confusion is perfect. "Thank you" for this nonsense.
Here a short assistance:
- "Frame first only slightly screw it" means that every screw has yet to see out at least 1-1,5cm, otherwise you later do not get the slats in the 'rubber shoes'.
-Once The frame is loosely screwed together, the female connectors 'thread' on one side in the 'rubber shoes' and gradually to the black middle band. Here also think of the double bars and thread this same time! The five shorter strips are attached to the specified postition under the long strips with a first hardness-adjusting slide. Mount the same, each one slider on the side of the rubber shoes, no harm, keeping the dual strips together.
-The Plastic extension on the hardness-adjusting slide is in each case under the bars and facing outward.
Band then bit by bit in the middle of the shelf slide, tighten loose ends of the slats in the rubber shoes and screws on the frame.
-Fertig.
I hope this short guide avoids double work, as with me yesterday.