Amazon and Aparoli delivered the set swiftly complete and the description accordingly. Some minor scratches / dents / bruising in the trunk are certainly irrelevant, also that the black Makita original tape was already severed, the goods so well was a Ruecklaeufer. Especially wertig the suitcase inside does not work, because the plastic molding (?) - Material in some places so stiff rests that it almost inevitably gets white bruising when removing / inserting the tool, on the other hand, however so loosely applied that it unable to keep safe the tool. The fold-out bit holder also suffer from the above-mentioned high tolerances - with the violence often necessary they dissolve effortlessly carried quite antatt in turn to "hinge". A pair of pliers fits so poorly in the recording that the plastic case has larger scrapings there. Whether this was done already in a "violent" Originalbefuellung or when first-time buyers, I can not say of course. However, these are all beauty mistakes that would justify a deduction of points.
More problematic is that the plastic handle of both clamps having in some places impressions / cuts.
When Bitsch Rauber, who is in the photo visible for better grip of a hard plastic (Makita Turquoise) and black sheathed soft plastic, I discovered that the hard plastic is broken at the shaft and the parts are probably held together only by the soft plastic sheath. At this point I can prove otherwise only "perceived" low value of the tool so and I decided due to this lack of unambiguous products back.
The quality of drills in practice to which it would actually happened to me especially, I can therefore not say anything. Some other impressions in detail:
- The two pliers acting in hand recognizable less solid than "good" Hardware Quality (about the type Lux red).
- The tape measure convinced, however.
- The spirit level, entirely of plastic, acts as the cheapest tool that I held in my hands for a long time.
- The flexible bit extension is such that the bit holder and the drive can be moved only at the two ends. However, for curved posture scrubs the inside rotating axis against the shield.
************************************************** **********************************************
CONCLUSION: If the parts that matter, so drill and bits, should be of high quality (. I can not test products back wg), the manufacturer proves to the three gifts, and with this performance a Baerendienst. I go to the following evaluation from "single" quality.
Approximately 75 EUR purchase price are not much for 200 parts. Measured in mind that the vast majority bits are, but not so little that you (apparently so) must reduce the quality offered Erwarungshaltung on. 2 points because of basically extensive and clearly arranged material in a practical case. But since there is no question because of the quality offered, that I would always use other pliers, spirit levels, Bitsch Rauber etc., the value of "A Suitcase For-All Tool for drilling and-screwing" also reduces again.
PS: For the classification: This is (except for a case of accidentally double delivery) in> 10 years, my first products back on Amazon. Other Makita tools I have to my satisfaction.