The installation is quick of hand, you should only pay attention to the fact that the holders are screwed reasonably symmetrical, otherwise the optics suffers. After screwing you can then immediately Clip the the mark, where you should definitely also use the adhesive surfaces, because the clamp was not particularly stable alone with me. A slight pressure with your finger on the lower clamping and already the mark was there freely again, which is why I would not give up the bond. Before Clip the stick and you should, if necessary, the center still attach spacers (eg stop absorber silicone or plastic from discount or hardware store) because otherwise you can easily turn later when printing to the plate center this. It would be better, of course, the indicator would lie completely flat. The terminal slots prevent this but they are very far forward and thus unfortunately behind the white space (about 1.5 cm) remains, through which one can look from the top.
Particularly advantageously, the attachment seemed at the car front since the opening in the front grille matches to the size of the Simple-Fix holder and the license plate so no longer survives. In addition, the thin still visible clamping edge falls here in top view on indicator WG. the gray front grille to little.
With the optics back I was at a white car, however not satisfied. First bothered me there the black clamping edges, second acts a white plate pretty lost on white ground. Thus I have the Simple-Fix-holder disassembled back again and replaced by a high quality revolving black metal design holder, which returns the necessary Krontrast and acts so much more noble.
Yet another point of me not like so much: The plastic clamping edges are outside quite sharp, which is why at the car wash like to get stuck with a sponge, cloth or leather there. If you want to reduce this problem, you should file off the edges slightly before mounting.
Conclusion:
Who likes it gladly reduced and want to give up the screw holes and also is not afraid that the usual vandals maybe a short tear off the indicator will probably be happy with the Simple-Fix Set. However, if you like a preferred access safest possible mounting and lives in an area that is known for license plate thefts, should better consider other solutions in the eye!
