The touch sensitivity is relatively high, so that when depositing the clock turns on before the lamp, but you have to touch the lamp only slightly by them also off again. Therefore, you should assemble the lamp Incl. Bulbs without power. Similarly, the cable should be unplugged also when changing bulbs, since otherwise when screwing the lamp this time and again in different brightness levels "by turns". It would be nice "flat" connector was that one could install between bed and wall outlet space-saving one. Unfortunately, located on the lamp a normal plug which is being evil "pressed" by the advance of the bed against the wall.
Precious is the frosted glass, so that it is illuminated beautifully evenly with clear bulbs. The only disadvantage. For a lot of money I bought the lamp dimmable 5W LED lamps. In the lamp can turn this only between 90% and 100% brightness, whereas they show to my living room lamp an stufenolse brightness of 20% to 100%. Likewise it behaves in with E14 energy saving bulbs. Here you can also no significant differences in brightness notice in Wofi table lamp recognize.
Would Wofi manifest itself in the descriptions of the energy-saving lamps (incl. Source) you can use a reasonable dimming, the 5th point would be justified. As long as there is a reasonable but not very economical E14 bulbs with 20 watts per lamp from the hardware store and even 4 stars.