I've tried some glue, with some very modest results. This fabric glue, however, has convinced me. It is transparent, easy to apply and there are different ways of bonding. I prefer the following, which worked best for me:
First clean the parts to be connected and place on a flat surface. A page with adhesive coat (a little thicker in Cordura, because of the structure. In ripstop nylon you need less.) Wait 7 minutes, then squeeze and iron with a material suitable for temperature over it. (In Cordura I took the attitude "silk" that has worked best. "Cotton" was a bit too hot for the plastic coating.) Leave just yet, until the seam is completely cold and Voila. it has a seam, which can withstand a lot. There should be a backpack, I have however also pulled a seam with the machine.
Positive
--------
- Relatively inexpensive
- Economical available
- Works really
- Easy to dose
Negative
----------
- Chemical odor (adequate ventilation when working worry!)
Conclusion We'll be back and I think I'll stick with it and make the project with this adhesive finish.