Programming is as before without any problems. Unfortunately, I find the pressure point of the keys in the URC 7960 is not very good. If you can feel the pressure point you have to press again correctly so that the signal is sent at all the key. Such a behavior I would not expect at a new remote control.
Even the "Smart Control keys" (a programmable button sends several different codes FB) I can not abgewinnen positive, because the function is much too slow. I had, for example, the functions "TV-On" and "Receiver-On" programmed on the TV button. By pressing the TV button then is only about 2 seconds, the signal to TV, and then again two seconds sent "receiver-An". After pressing the TV button so you have to hold out for several seconds, the FB, so that they can send the signals. As I express rather consecutively two keys, the process is much faster.
Also, I have observed that the Remote controller has after pressing the TV button partially lost the mode / the plane, probably because I've Eneloop batteries in it. Otherwise, the FB works with the Eneloop batteries easily.