Nevertheless me this kitchen faucet really like, I must mention a few things: 1) The dimension of 22 cm wingspan is not true, there are exactly 25 cm. (Horizontally from center to center) 2) If you install less than the weight at Ausziehschlauch and pulling the hose out, jammed the Weight with the other lines and the hose no longer go back. Conclusion: Without installing weight, work well and you can take off the tube longer. 3) If you do not want to expand the whole kitchen sink, you have trouble screwing together the Ausziehschlauch and the feed line, because this is too short and you screw together consequently too little space when has. Conclusion: The inlet pipe should be one cm longer than the bottom depth of the sink, so that one at the difficulties screw together not has. 4) If you have a 40 mm fitted kitchen plate where the valve must be used, then you can only if you the panel omits because with aperture thread is flush with the plate and you screwing up not gets. Conclusion: Aperture unfortunately must be eliminated and can only be fitted with the washer but Better if the screw would be 5 mm longer, then you could also build the beautiful iris with. I like this kitchen faucet in spite of everything very well and I would have awarded nearly even 5 star, but I would only awarded 4 stars because some of the enumerated Verunglückungen.
