Have this switch for 10 months in operation. At the inputs are connected: Comag HD 25 satellite receivers, Apple TV3, Sony BDP 780S. At the exit follow the Lindy HDMI Audio Extractor, from there it goes on to a Panasonic LCD TV (Name: TX 37 or so). The Audio Extractor sets the tone with a Toslink fiber optic cable to an audio projector Canton DM-90 on. HDMI cables are Amazon (basic) and of Oehlbach. At first it flickers always a little, to which all "smart" devices recognize each other. But then it funzt. The switch turns on several switched devices to each of the selected last. Is to eg the satellite receiver and the BluRay player is turned on, it goes so on. Turn to the BluRay player off again, the switch will return to the satellite receiver. I can quickly switch between, even though only with the little buttons on the tiny housing the switches. The active channel is each indicated by a LED. A remote control (as in at least one other review mentioned) was not present and is not necessary. That leave the cable in all directions, I find somewhat unattractive, but not bad. Conclusion: Without Stress picture of the TV and sound on Audio Extractor with the active speakers. I love it when a plan succeeds!