After 1 Year Search (previously had the Acer H5360BD) I wanted to now a Hammer image for the living room cinema. 4K comes for me so far out of the question because Sämmtliche content (HDTV and Blu-Ray) can not play back this format ...
And Germany needs known to which will be implemented ...
At IFA 2014, I could see the Epson 9200 personally in action and I was blown away by the Hammer.
1. Frame Inter polarization: In this mode, the projector between images calculated added, thus a very quiet image is created in 2D and 3D mode. (Blu-Ray Player must be switched to the 24p mode via HDMI!) That actually corresponds to the image from the HFR cinema known. From the 24 frames per sec. Makes the projector then 48 frames per sec.
2. Super Resulution: This feature goes into detail the image even recognize each hair of the beard. This works in both 2D and 3D mode.
3. Beamer settings: unbelievable!
4. Beamer handling: Very simple and reliable
I must, however, notice that I have not bought the projector at Amazon but in stores where he has also been calibrated to D65 standard. Likewise, the equipment has been tested in stores on pixel errors.
Conclusion: ABSOLUTE GEILES UNIT, for that price currently is not better in the market!
Additional: Measured at 1.4 m distance to overhead air outlet openings ECO mode 45db 2D mode, in 3D mode, the projector switches to normal operating order, and then reaches 50dB at an equal distance from air outlet openings.
Should the projector in 3D mode at approximately 1.4 m distance measured 59-60db reach so you should contact Epson connected! If you have an on-site warranty within 3 years from date of purchase, this can be remedied to the Lamp-Heat fan here is defective, as in my case. This was then replaced free of charge ...
