So, here is a brief recession Fello Brush. This is sucked away no fur with us, because I have no pets. But I have to say, the original brush to our Dirt Devil VS8 with slippers 1000 watt suction power (throttled product from the TV advertising, there not even on the DD buying website) is for a ton, as it has below a transverse groove and always rumkratzt on the carpet. So had to be a different brush. After days of back and forth and an ordered and returned AEG Turbosoft 1500 turbo nozzle / 32mm diameter I opted for the Fello and have to say that she took despite thorough vacuuming the carpet yesterday, still a lot of dust and lint from the out carpeting. I tested on normal Flor, at a slightly higher Flor, on Swedish carpet and linoleum. The shorter the pile, the better the result. At the highest pile the brush remained when driving with the bar almost stand against the grain she ran faster. The average Flor went to suck liquid and the knotted carpet from Sweden and linoleum brush showed their performance. It is, incidentally, moved by a thin belt and gets power through the intake air of the sucker. The brush sucks up to the edge, as the front side. Unfortunately, the brush does not have its own power supply, as it would always show same performance (as a brush Vorwerk) but costs three times as well. Cleaning is simple, it's just a big roller brush present in the picture so you can see that the brush is easy to open. Wonderful. Strange thing is that you have to use the supplied adapter to get the brush to the 32mm 'standard tube of DD. Without the brush adapter fits on a 34mm 'intake. Conclusion: Runs (still) remain (only once) it must be safeguarded, (thoroughly). Had the nipple but less power, the brush would not work.